1 / 9
Apple AirTag MOLLE and Universal 25mm Webbing Mount — zdjęcie 1
1 / 9

Apple AirTag MOLLE and Universal 25mm Webbing Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,08 € – 0,09 € netto (bez VAT)

Dla pliku: cap_0.2mm_PETG_MK3S_5m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,08 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
5,4 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This mount is designed for standard MOLLE webbing, laser-cut MOLLE , and standard 25mm webbing used on most backpacks.

Ocena
5 / 5
Polubienia
269
Pobrania
823
Wydruki
9
Wyświetlenia
5500
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This mount is designed for standard MOLLE webbing, laser-cut MOLLE , and standard 25mm webbing used on most backpacks. This includes non military packs!

Furthermore I used the official apple design guidelines to get the curvature of the AirTag just right.

This mount requires no tools to assemble.
To disassemble this mount, the cap has a small notch to use a screwdriver.

 

Find more projects like this on my blog :)
https://blog.hirnschall.net/

 

What and how to print:

Do not reorient the parts. They are designed to print without support and are oriented for maximum strength. If you reorient them such that the layer-lines are normal to the prongs that interface with the webbing they might break off.

You need to print:

  • 1x airtag-molle.stl
  • 1x cap.stl

Use a UV-resistant filament.

 

The tolerances do not work on my printer:

If the AirTag does not fit easily inside the airtag-molle.stl, use a negative value for the "XY Size Compensation" setting in the slicer for this part (e.g. -0.1mm). Move on to print the cap.

If the cap cannot be pressed into the airtag-molle.stl, use a negative "XY Size Compensation" value. 

If the cap is too loose inside the airtag-molle.stl use a positve "XY Size Compensation" value.

 

Tagi