Testors Modelmaster Paint Bottle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stackable rack to hold your Testors Modelmaster paints. It is strong enough to stack several units high.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 640
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stackable rack to hold your Testors Modelmaster paints. It is strong enough to stack several units high. The lids will fit into the bottom of the rack above to keep them stacked securely and you can read the labels. If your printer is tall enough you can print it with one of the ends on the bed and not use any supports.
Update 6 July 18: I added version 2 with curved supports on each end and the middle of the sides for more strength and easier printing. For those with smaller printers or different needs I added a 8, 6, and 4 bottle version.
Here is the link to my rack to hold Mission Models paints.
https://www.thingiverse.com/thing:2841154
Print instructions
Unassociated tags: art tools
Category: Tool Holders & Boxes Print Settings
Printer Brand: Printrbot
Printer: Printrbot Simple Metal
Rafts: No
Supports: No
Resolution: .2mm layer with .4mm tip
Infill: Recommend at least 25%. Its heavy when full.
Notes:
Print on end or side depending on your printer configuration. Do not print with bottom of rack on bed.
How I Designed This
Designed in TinkerCAD