Eibos Cyclopes Drying Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable drying rack for Eibos Cyclopes filament dryer.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 204
- Wydruki
- 4
- Wyświetlenia
- 1943
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I wanted to dry silica gel packets in my Eibos Cyclopes filament dryer so I designed this simple drying rack to fit inside and stack so there's two layers. There's room for a third layer, if required.
I printed it in ASA so it would withstand the highest temperature of the dryer. I didn't have any issues with it sagging in the middle while loaded with 50g packets at maximum temperature for several hours.
I haven't tested with PETG, but it may just about suffice at maximum temperature. I wouldn't recommend PLA, but it may just about work for PLA drying temperatures.