Zodiac AirTag holders

Some colorful holders for the apple AirTag themed with zodiac signs - can be edited to add any type of symbol.

There are two main parts and symbols.

How to print

(Work in progress, this section is being improved)

First, you have to decide which type of casing you want to print. See the image below with the three different types available:

Then you have to print the Cover and Casing files of the same type. 

To achieve the dual color effect:

1. Align the symbol you want to print and the cover in PrusaSlicer.
2. Print the symbol you want first, without a skirt, at 0.1 mm layer height.
3. Without removing the symbol from the bed, print the cover on top of it, using a different color, with a 0.2 mm layer height. It will be laid on top of the symbol and get fused with it as you see in the photos.

Assembly

1. Place the AirTag in the casing, with the shiny part facing towards the circular opening.
2. Put the cover on top of the casing, and apply some force on the four small tabs to fit the two parts together.
3. Feel free to use any type of cord or keychain to hold the casing using the hole on one of the corners, or the version with slots for inserting a strap or belt.

Follow us / support

Did you like this design? Follow us on Instagram! We are @twothingies

If you really like what we are doing and want to support us, you could buy us a coffee or two!

Selling prints of our designs

Please be aware that our designs are available for free for non-commercial purposes only. 

If you would like to sell 3D prints of our designs in your store, you can join one of our membership tiers!

If you have other ideas, we would be happy to discuss that with you! Please send us a message if you are interested at [email protected]

Disclaimer

Due to the different properties of 3D printing filaments and the tolerances of different machines, you might need to scale up or down some of the print files, in case they don't fit when you print them.