Wanhao i3 Plus extruder TL smoother mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case to mount a triangle labs 'tl smoother plus' style of TL smoother PC. It mounts on the back of the extruder to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A case to mount a triangle labs 'tl smoother plus' style of TL smoother PC. It mounts on the back of the extruder to the rear cable cover. You may need some longer M3 screws (8-10mm) if the existing ones don't fit.
Fitting a TL Smoother to my extruder motor made a huge improvement to a moire, salmon sking effect, on my prints. Fitting additional smoothers to X and Y motors showed no improvement in these tests so may be of little benefit.
I suspect the actual smoother modules I have a fake and not genuine Triangle Labs units as triangelabs.org is spelled 'triengle labs' haha. The still worked fine (for now anyway)!
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament: 3D Fillies PLA+ Clear
Notes:
I used PLA but ABS, PETG would be fine as well I'm sure.
Category: 3D Printer Accessories