Batman Popvinyl Pedestal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple pedestal for displaying a Batman Popvinyl figurine. The print shown in the images was printed with the logo…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 602
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple pedestal for displaying a Batman Popvinyl figurine.
The print shown in the images was printed with the logo on the top to allow for a color change filament swap on single extruder printer.
I designed this with a small cavity on the bottom to allow for the placement of 2 way tape to keep the pedestal in place. I ended up using supports for this with the orientation I chose to print (with the logo on top), in order to facilitate the color change I mentioned above, but they probably weren't needed.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Category: Decor