1 / 4
Airtight Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This sealed and airtight box takes inspiration from the watertight doors of ships.
The box is sealed when the screw, with a spring under it, is pulled up and rotate on the slots of the cover. The spring will then press on the cover.
It includes two separate sealed compartments, and in the case one spring fails the content of the other compartment wouldn't be compromised.
Other than the prints you would need the following items:
- 4 x M2 screw 20mm
- 4 x M2 nut
- 4 x 2mm ID spring ( usually 4mm OD ), 5mm
- Rubber seal ( if you can't print it with tpu )