Dust collection attachment for Dremel 565 / 566
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust collection attachment for Dremel multi-tools 565 / 566
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 156
- Wydruki
- 1
- Wyświetlenia
- 1223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Dremel attachments 566 and 565 feature a port that to me looks like a attachment point for a vacuum cleaner (2nd picture). I found however that Dremel does not sell anything that connects to it. So, I decided to make something that does!
The attachment posted connects to a, in my case, Karcher vacuum cleaner hose but should fit other brands as well. The inner diameter is 35.4mm and tapers in to 34.4mm to provide a snug fit to the vacuum cleaner hose.
I do recommend to not run the vacuum cleaner at it's highest speed as the attachment can start to whistle due to the small diameter of the dust collection port.
I also posted the part that just fits in the dust collection port so anyone can create their own attachment. It will print in about 3 minutes so it's a nice piece to do a test fit with.
The parts were designed in Sketchup, skp-files are also included.