1 / 1
FGC-68 MKII UNW370 top rail and low rail shroud set — zdjęcie 1

FGC-68 MKII UNW370 top rail and low rail shroud set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a shroud model for the FGC68 TIPX edition

Ocena
0 / 5
Polubienia
5
Pobrania
36
Wydruki
0
Wyświetlenia
193
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

this is the shroud set is based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker.

to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker

the starter set for the FGC68 can be found here:


the low rail uppers can be found here:

this low rail right is the same hight as for the new FGC9/FGC6 MKI/MKII rails that I have made.

the FGC68 MKI low rail was in a different hight.

for now the low rail shrouds are a bit limited in there options. but this will chance later in this year. for both the FGC68, FGC6 and FGC9

in case you don’t want to wait of manual update a already printed shroud just fallow the steps in this video.
 

Tagi