Fast Print Kalimba Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I figure a Kalimba is less likely to get used when zippered in the case so I remixed this stand for printing fast.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 94
- Wydruki
- 3
- Wyświetlenia
- 532
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I decided I needed a Kalimba stand and found the following from Basement Creations:
https://www.printables.com/model/205107-kalimba-stand
I wanted to print a stand faster though so I remixed it. It ended up a fair amount different but still seems to work fine for what I want (which is to keep the Kalimba out of its zippered case so it can used on a whim easier)
This fits the Kalimba loose enough to use the stand as it is or has some room to add some felt or other thin padding if desired.
I used 6 walls and printed at 0.28 layer height. Printed with no support from eSun PLA+ and it took about 3.5 hours at 80mm/s.