Octagon Rhomboid Lattice Stress Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Something you can use to test your resin printer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 499
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this long ago to test my Phrozen Sonic Mini 4k. It was specifically to see how strong I can get such a delicate structure with Sirayatech Blu Resin.
If your printer is tuned in and your curing is sufficient, this structure should end up being at least structurally sound. If not, it will be very soft or brittle. There is obviously no way this design is supportive. It's probably the opposite of what a lattice should do. But you should be able to drop it without breaking it with a strong resin and good settings.
You can resize this smaller to see at what point the printer or resin fails. The arms connecting the facets here are about 1mm thick.
Looks nice when printed with a clear resin.