Sunglasses holder (for Honeycomb Storage Wall)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for storing a pair of sunglasses. Should fit most sizes.
- Ocena
- 4,821 / 5
- Polubienia
- 406
- Pobrania
- 1788
- Wydruki
- 34
- Wyświetlenia
- 5271
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP
Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store some sunglasses.
Since I already had a bunch of base parts (insert-empty.stl or any of the other available over at RostaPs model files) ready to go, I took the easy route and used a little bit of superglue to join the two pieces together. It has the added benefit of being easier to print and also allows for using separate colors for the insert and the holder. Depending on how tuned our printer is, it's also possible that it will just be a press fit.
There is two lengths (40mm and 55mm) available, in case you happen to have sunglasses which require a bit more room. You can simply test this beforehand with a ruler:
