Filament Dust Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just another dust filter for 1.75 filament.
- Ocena
- 5 / 5
- Polubienia
- 125
- Pobrania
- 1487
- Wydruki
- 18
- Wyświetlenia
- 11 862
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Just another dust filter for 1.75 filament.
I do not like printing the hinge in place as it gives unnecessary bulk to the hinge. I am using simple pin that I cut to proper length.
Holes for hinge pin need some cleaning with 1mm drill. I used pin vice and went slowly. Otherwise the plastic can melt.
There is one "blind" hole - the pin should be pushed in with force. No need for glue.
Print instructions
Unassociated tags: Dust Filter, Filament Dust Filter
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2 Prusa Quality preset
Infill: does not matter
Filament: any any any
Notes:
I used like 200 perimeters to force that little thing to be printed with 100% infill.