Thick HDD Riser & Standoffs for Minisforum UM560/UM580
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This modification is to accommodate an extra thick 2.5" hard drive
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 1072
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I wanted to install a 2.5" 5tb HDD into this newer mini-pc, but the darn thing was too small. With the power of Fusion 360 I modeled an adapter to accommodate the extra girth.
You will need longer M2.5 screws. I have texted M2.5x20mm screws.
I used these with success. (https://www.amazon.de/gp/product/B01N11ELNG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1)
There is the riser and stand offs, they can be printed separately or together.
The stand offs do not require supports.
The riser does require supports from the build plate.
I built and tested 10-20 prototypes to get this fitting as well as I got it. I hope someone finds this useful.
I used PETG for the parts.