Bike frame head mount for GoPro / NICEBOY camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This lets you mount your camera on the "head tube" of your bike.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 369
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't like mounting the camera on handlebars since it was uncomfortably shakey and I tend to do quite a lot of “zigzagging” when going slow which was just bad to watch. The only other place where I could mount the camera was the frame head tube of my bike.
The outer diameter is 41.2mm and with a piece of rubber padding (from some old inner tube) it fits perfectly.
You will need one mounting bracket (see photos) otherwise you probably won't be able to tilt the camera up to a good level (unless you want to record your wheel not the road then it will be ok 😜).
I had one bad layer, visible in the last photo, that makes it looks like the mount has broken but it is fine. I already made a 1,5h test ride through local woods (quite shakey) and had no problems.