Wall Mount for Technoline WL 1030
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plate and holder for Technoline WL 1030 air quality monitor.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
The Technoline WL1030 air quality monitor just has a table stand. But we wanted to hang it to the wall near the power plug.
So I designed this wall holder.
The holder consists of 2 parts: a wall plate and a wall holder.
The wall plate can easily be fixed to the wall.
The wall holder can be put on the wall plate hiding all screws.
You can remove the WL1030 and put it on the table.
Additionally, in case you want some angled version, I have designed a specific table holder.
Needed Material:
- 4x screws 4x40mm
- 4x wall plug 6mm
Printing Instructions:
Filament: PETG, ABS or PLA should work
Infill: 30% min.
Support:
- not deeded for wall plate and table holder
- yes (for the wall holder due to it's dove tail at the back side).
Attention:
Before drilling a hole into the wall near the power plug, first ensure you will not hit the power line!