Ender S1 Sprite Extruder CR-Touch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tighter fitting CR-Touch Mount with X Offset = -49.3 and Y Offset = 0.
- Ocena
- 4,917 / 5
- Polubienia
- 108
- Pobrania
- 1950
- Wydruki
- 12
- Wyświetlenia
- 7433
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Basic Description
This is a remix of a CR-Touch mount. https://www.printables.com/model/255096-sprite-extruder-ender-s1-pluspro-cr-touch-mount-fo
I redesigned it for my Ender 3 S1 Pro.
Reasons for remix
The original had its X-offset being-55.5mm however this didn't allow me enough room for my X-axis to reach for screw tilt leveling located on the front right-hand side. Hence I've made changes that reduced the X-offset to -49.3mm. I've added a gap to allow for the connecting cable to be managed through and held in place.
Print Settings
Layer height: 0.2mm
Base layer height: 0.3mm
Infill: 20%
Material: PETG
Walls: 3
Printer: Ender 3 S1 Pro
Supports: Everywhere.