Magnetic PTFE Tube Connectors for 6x3 Disc Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick modification to fit 6x3 disc magnets
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 374
- Wydruki
- 8
- Wyświetlenia
- 1917
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on the no offset (default) version of the original.
A quick and slightly dirty modification to accommodate 6x3 magnets. I filled in the original holes and re-pocketed them to 6x3 and chamfered them as in the original.
The dirty part is that the magnets are no longer visible through the top, as I filled part of it in because I wanted more contact area for glue to hold the magnets in.
I couldn't be bothered to orient the magnets the same way on each side, so I marked up the side to indicate the correct alignment. Maybe take a minute to figure that out and avoid my mistake.