RMRC Recruit VTX/FC/GPS mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick design for a RMRC Recruit. It holds a Matek VTX-HV, just about any 30.5x30.5 FC, and a micro GPS unit.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a quick design for a RMRC Recruit. It holds a Matek VTX-HV, just about any 30.5x30.5 FC, and a micro GPS unit. The FC and VTX are on the same level so the usb plug is blocked. You may want to use some standoffs to raise the FC so the usb port is not blocked. I may post another version with higher standoffs in the design.
Added a version 2 with higher CPU standoffs and lowered the GPS holder by 3mm.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
20%
Notes:
I used PETG as it has a higher temperature tolerance.
Category: R/C Vehicles