1968 Mustang Reverse Lockout Knob Bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bushing for the manual transmission shifter reverse lockout knob of a 1968 Ford Mustang.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Apparently it's pretty common for these to break/wear out and nobody makes replacements. Instead you have to buy a whole expensive shifter assembly. The stock bushings are pretty anemic and there's lots of room so I made these longer and thicker for a better fit, smoother operation and better durability.
Given the application I printed these in Overture Nylon filament which is decent stuff. On my Prusa MK3S I used the Taulman Bridge profile modifying the bed temp to stay at 90c with a little glue stick on the bed to help with adhesion. The nylon does shrink a lot which required scaling up the print to 104% in the slicer to compensate.