Modular snap-fit gothic ruins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-fit, modular building for 28mm / heroic scale tabletop games. Stay tuned, more pieces might come. Feel free to…
- Ocena
- 0 / 5
- Polubienia
- 118
- Pobrania
- 304
- Wydruki
- 0
- Wyświetlenia
- 2407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
A snap-fit, modular building for 28mm / heroic scale tabletop games.
Stay tuned, more pieces might come.
Feel free to give suggestions.
Please post your makes and show off your constructions!
Post-Printing
Important: you will need to glue some toothpicks into some of the holes to act as pegs for snap-fitting.
The pegs should be approximately 10mm length with 5mm emerging (trim the toothpicks once the glue is dry).
Chose a configuration, for example the lower holes of each pair for columns and the upper ones for the walls, and the left ones for the floors.
Put only one peg on top of each column but a peg on both holes on top of wall sections.
Use very thin foamboard or cardboard on top of the floor frames.
Tips:
- Use a mixture of superglue and PVA glue to glue the pegs.
- Slightly file the tip of the pegs for easyer assembly.
Category: Games