1 / 2
iPad (gen 8+9) mount VW Passat B8 rear seats — zdjęcie 1
1 / 2

iPad (gen 8+9) mount VW Passat B8 rear seats

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

iPad (gen 8+9) mount VW Passat B8 rear seats in 3 parts without support

Ocena
0 / 5
Polubienia
10
Pobrania
59
Wydruki
0
Wyświetlenia
1392
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The holder is printed in three parts, without support. Originally I wanted to use ASA or PETG, but due to warping I had to change to PLA. But the angle holders are printed in PETG.
The parts are connected with M3 screws, the angle holder is prepared for a bolt or a threaded insert. Of course you can also glue everything together.

 

Update: 
Don't use PLA, one day in the hot summer sun and it shrinks!

Tagi