Diamantový les Insert (Diamond Forest)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insert for board game Diamantový les (Diamond Forest) with compartments for Dwarf miniatures.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 413
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an insert for board game Diamantový les (Diamond Forest) by Czech author (released by Dino).
Included are compartments for Dwarf miniatures. I recommend using some kind of filler, like molytan so they don't break.
Print instructions
I uploaded PrusaSlicer project files, but if you don't use them, here they are.
Printer brand
Creality Ender 3 V2 (upgraded)
Supports
No
Rafts
No
Resolution
0.2 mm (0.3 mm is also printable)
Infill
15% (lightning) or 10%-15% other types (it will use a lot of filament though)
Filament
PM PLA Black, Aurapol PLA Black
Notes
Parts are split so they fit on 230 mm x 230 mm bed (such as Ender 3).
Walls are 0.9 mm thick, when printing with 0.4 mm nozzle, use 2 perimeters with 0.45 mm extrusion width. When printing with 0.6 mm nozzle, use 1 perimeter with 0.9 mm extrusion width.
I also recommend using PrusaSlicer v2.5 and it's lightning infill pattern. It saves so much infill as it's needed only for top surfaces (the insert is rigid enough so no infill for actual strength).
I printed mine with 0.2 mm layer height but 0.3 mm is also suitable.