Print-In-Place Helicopter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This helicopter is print-in-place!
- Ocena
- 4,444 / 5
- Polubienia
- 252
- Pobrania
- 1721
- Wydruki
- 12
- Wyświetlenia
- 9205
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introducing the print-in-place helicopter!
Note: This is a very challenging print! Your temperature settings have to be fine tuned as well as your flow rate, and your bridging and overhangs need to be mastered before attempting this. The clearance used between parts are 0.3 millimeters.
To fit the large version on a standard print bed, rotate the model 45 degrees.
For the large version, cut filament and insert them into the rocket pods to make rockets!
I designed this using Fusion 360 and printed this on an Ender 3 V2.
Consider supporting me on Patreon, these designs take a lot of work and time :)
Social Links: