1 / 7
Prusa MK3S+ upgraded fan duct and mounts for Phaetus Rapido hotend — zdjęcie 1
1 / 7

Prusa MK3S+ upgraded fan duct and mounts for Phaetus Rapido hotend

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgraded MK3S+ part cooling fan, extruder cover and fan stand-off to suit Phaetus Rapido HF hotend

Ocena
0 / 5
Polubienia
24
Pobrania
186
Wydruki
0
Wyświetlenia
2738
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The improved fan duct is a remix of a very good upgraded fan duct from KalleKnall. https://www.printables.com/model/39679-prusa-mk3s-and-mk3s-fan-duct-with-pinda-support.

I've modified it so it will fit as a direct replacement for the latest MK3S+ duct which has a support notch on the RH side. That modified duct can also be downloaded here: https://www.printables.com/model/260038-remixed-part-cooling-duct-with-pinda-support-t

I've also included here a modified extruder cover which is 8.3mm lower to suit a Phaetus Rapido hotend (HF only). May also suit a standard Volcano hotend, as I believe it's the same length (not confirmed, however.) 

And lastly, a 5015 fan stand-off to suit the different fan angle.

I recommend printing the fan duct in ASA, or ABS to stop warping.