30-in-1 screw driver bit case with compliant locking mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an easy to print screw driver case that holds 30 driver bits
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 51
- Wydruki
- 2
- Wyświetlenia
- 490
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
It can hold:
- 30 driver bits that have 4.5mm width(4mm for hexagon's side to side) and length of 28mm
- screw driver with maximum of 22mm diameter and 133mm length
The driver bits are stored diagonally to reduce case's overall height and length, and still allow easy access to all bits.
The overall size(W*L*H) of the case is 52mm*140mm*28mm. With wide opening at the outer case, pulling the holder out is very easy. And with short width and height, the case is easy to carry inside your pocket.
Print requirment:
No support needed.
Note:
The case is locked by two flextures at outer case, so things will not fall out accidentally when stored inside the outer case. But keep in mind that the compliant mechanism is not designed to keep holder inside under large force.