1 / 7
My Screw/Bolt Measure 2 to 10mm including 2.5, 3.5, 4.5. — zdjęcie 1
1 / 7

My Screw/Bolt Measure 2 to 10mm including 2.5, 3.5, 4.5.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had a mix of screws with some potential 3.5mm and 4.5mm

Ocena
5 / 5
Polubienia
130
Pobrania
1345
Wydruki
35
Wyświetlenia
5828
Oceny
25

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I am probably mistaken, but most screw measuring/sorting tools seem to be more bolt orientated as missing 3.5mm and 4.5mm in all other models and 2.5mm in most cases.


I liked the one by Boogie a little longer than most, leaving space to add my missing 0.5mm.


I have produced two versions. Both versions have proud length numbering as per the original. However, the screw/bolt diameter lettering has the choice of proud or sunken lettering.
I Have started adding Step files to my models to make it easier for others to change them if you so wish.


PLEASE remember to like it.
With the article below on changing colour, I have attached my Gcodes for both using two different colours on my single-colour printer.
 

https://help.prusa3d.com/article/color-change_1687

Will be printing using Prusament. preferred settings below. 

25/08/2022: Sunken version printed in orange, black numbering. All works well, tested 2.5, 3.5, 4, 4.5 and 5mm. Sure the rest will be ok

 

Tagi