Spartan Shield for CNW Masterkey Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Watch the build video here: https://youtu.be/ZUMoA5YXdc8 I designed these parts for the Dart Zone Mk3 Masterkey kit by…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Watch the build video here: https://youtu.be/ZUMoA5YXdc8
I designed these parts for the Dart Zone Mk3 Masterkey kit by Campbell's Nerf Works. During my build, I mistakenly misplaced the part that retains the Magnus under the barrel shroud. That's a pretty important part for priming and firing the masterkey. As I set about designing a new one for myself, I thought...let's make it a shield...and give it ammo storage.
So I did.
Not too large, but noticeable. Prints quickly and comfortably on my Prusa Mini. Used M3 hardware to secure. Requires drilling holes in the original barrel shroud to fit the M3 screws. Used 2x 30mm screws for the retaining cap and 2x 10mm screws for the ammo holder.
Enjoy!
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Filament:
Amazon Basics PLA
Translucent Orange
Category: Mechanical Toys