1 / 14
OSS TEAM T12-X soldering station with tilted panel and more — zdjęcie 1
1 / 14

OSS TEAM T12-X soldering station with tilted panel and more

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

https://www.youtube.com/watch?v=Nn9B46IjsVU ENGLISH Only tested on T12-X, but can work on equivalent models with boxes…

Ocena
0 / 5
Polubienia
8
Pobrania
29
Wydruki
0
Wyświetlenia
1007
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

 

 

ENGLISH

-------------

Only tested on T12-X, but can work on equivalent models with boxes of the same dimensions

I found my T12-X soldering station a little too bulky, the screen not very visible and too dark. I also wanted to have all the tips and other accessories next to the soldering iron placed on the control block (easily removable because glued with velcro).

I added a blue diode for the presence of 24V, a red diode to display the PWM output activity, optical fiber to deport diode D7 from the motherboard and which displays the status of the soldering iron (Flashing = operational, fixed=idle or standby).

In order to increase the brightness of the display, I removed the original smoked window present between the metal panel and the LCD screen, instead I put a piece of transparent plastic cut from any packaging (to remove the part, you need to unsolder the soldering iron connector and unscrew the potentiometer nut

The sound of buzzer was a little weak, so a hole underneath make it louder

Collect the rear M3 screws and put them in front if you don't have the same as the original ones, put normal M3 screws on the back

Print without support, print part 1 as shown (cut the 3 ones I made)

You will need:

  • 1 rocker switch 15x21mm:

https://fr.aliexpress.com/item/4001032036059.html?spm=a2g0o.productlist.0.0.2358578e17BYix&algo_pvid=64d99710-326d-4b77-adee-c14807fd97f7&algo_exp_id=64d99710-326d-4b77-adee-c14807fd97f7-16&pdp_ext_f=%7B%22sku_id%22%3A%2210000013607659399%22%7D&pdp_npi=2%40dis%21EUR%212.21%211.99%21%21%21%21%21%400b0a050b16598029216121244ed588%2110000013607659399%21sea&curPageLogUid=BSeaJeE6owav

https://fr.aliexpress.com/item/1005002028490578.html?spm=a2g0o.order_list.0.0.68e55e5b9ncSoJ&gatewayAdapt=glo2fra

  • 11 inserts M3(OD4.2):

https://fr.aliexpress.com/item/32587062171.html?spm=a2g0o.order_list.0.0.68e55e5b9ncSoJ&gatewayAdapt=glo2fra

_________________________________________________________________________________________________

FRANCAIS

------------------

Essayé uniquement sur T12-X, mais peut fonctionner sur modèles équivalents avec boitiers de mêmes dimensions

Je trouvais ma station de soudage T12-X un peu trop encombrante, l'écran pas très visible et trop sombre. Je voulais aussi avoir toutes les panes et autres accessoires à côté du fer à souder posé sur le bloc de commande (facilement amovible car collé avec du velcro). J'ai donc pensé à incliner et déporter le panneau de contrôle avant ainsi que modifier la partie arrière pour accueillir le support du fer à souder, lui même fixé sur la base avec du velcro pour être facilement enlevé

J'ai rajouté uns diode bleue pour la présence du 24V, une diode rouge pour afficher l'activité de sortie PWM, de la fibre optique pour déporter la diode D7 de la carte mère et qui affiche le statut du fer à souder (Clignotant=opérationnel, fixe= repos ou veille)

Pour augmenter la luminosité de l'affichage, j'ai supprimé la fenêtre fumée d'origine présente entre le panneau métal et l'écran LCD, à la place j'ai mis un morceau de plastique transparent découpé dans un emballage quelconque (pour enlever la pièce, il faut dessouder le connecteur du fer à souder et dévisser l'écrou du potentiomètre

Récupérer les vis arrières M3 et les mettre devant si vous n'avez pas les mêmes que celles d'origine, mettre des vis M3 normales à l'arrière

Imprimer sans support, imprimer la pièce 1 comme montré sur la photo (couper les 3 que j'ai fait)

Vous aurez besoin:

  • 1 Interrupteur à bascule 15x21mm:

https://fr.aliexpress.com/item/4001032036059.html?spm=a2g0o.productlist.0.0.2358578e17BYix&algo_pvid=64d99710-326d-4b77-adee-c14807fd97f7&algo_exp_id=64d99710-326d-4b77-adee-c14807fd97f7-16&pdp_ext_f=%7B%22sku_id%22%3A%2210000013607659399%22%7D&pdp_npi=2%40dis%21EUR%212.21%211.99%21%21%21%21%21%400b0a050b16598029216121244ed588%2110000013607659399%21sea&curPageLogUid=BSeaJeE6owav

https://fr.aliexpress.com/item/1005002028490578.html?spm=a2g0o.order_list.0.0.68e55e5b9ncSoJ&gatewayAdapt=glo2fra

  • 11 inserts M3(OD4.2):

https://fr.aliexpress.com/item/32587062171.html?spm=a2g0o.order_list.0.0.68e55e5b9ncSoJ&gatewayAdapt=glo2fra

Category: Tool Holders & Boxes

Tagi