1 / 31
Uni-T UTi260B UTi690B Lens Cover + multiple Macro Lens holder — zdjęcie 1
1 / 31

Uni-T UTi260B UTi690B Lens Cover + multiple Macro Lens holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Uni-T UTi260 Lens cover + easy swapable multiple macro Lens holder

Ocena
5 / 5
Polubienia
12
Pobrania
67
Wydruki
1
Wyświetlenia
1087
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Video https://www.youtube.com/shorts/X6UwkqAMoZo

________________________________________________________________________________________________________

ENGLISH

--------------

I wanted to create a simple system to be able to switch between normal and macro lenses easily, add a protective cap all without having to remove this or that part.

What you will need:

Printed in PLA without supports (I created the only support needed on the cap which will just need to be cut off)

  • March 10, 2022:Added support for 20mm macro lens by request of a member of the eevblog.com forum. I couldn't try it because I broke mine while taking the measurements! Leave me a comment if anything needs to be modified

I preferred to make this support in 2 pieces to be glued with 2 centering studs to avoid removing the tedious supports after printing

  • March 11, 2022: Added removable "capuchon amovible V2" which reverses the position of the magnets to increase the magnetic attraction, "text V2" and "Butée V2". Be careful to use these 3 V2 files for correct alignment.
  • March 14, 2022: Added Text V3
  • March 26, 2022: Added Stopper V3 and Cap V3 with 4 more magnets to improve hold in the open position
  • April 22, 2022: Added interchangeable macro lens holders. Very easy to swap them depending on the desired resolution. No more need to use glue to hold the lens in place, with the new version, it is sandwiched between the 2 parts joined with double sides tape

You will need:

UTi260B UTi690B UNi690B LCD+Keyboard cover: https://www.thingiverse.com/thing:5341742

________________________________________________________________________________________________________

FRANCAIS

----------------------

Je voulais créer un système simple pour pouvoir basculer entre les lentilles normale et macro facilement, ajouter un capuchon de protection le tout sans avoir à enlever telle ou telle pièce.

Ce dont vous aurez besoin:

Imprimé en PLA sans support (j'ai créé le seul support nécessaire sur le capuchon qu'il suffira de couper)

-10 mars 2022: Ajouté le support pour lentille macro 20mm sur demande d'un membre du forum eevblog.com. Je n'ai pas pu l'essayer car j'ai cassé la mienne en prenant les mesures! Laissez moi un commentaire s'il faut retoucher quelque chose.

J'ai préféré faire ce support en 2 pièces à coller avec 2 plots de centrages pour éviter d'enlever les supports fastidieux après impression

  • 11 mars 2022: Ajouté capuchon amovible V2 qui inverse la position des aimants pour augmenter l'attraction magnétique, text V2 et butée V2. Faire attention à bien utiliser ces 3 fichiers V2 pour un alignement correct
  • 14 mars 2022:Ajouté Text V3
  • 26 mars 2022: Ajouté Butée V3 et Capuchon V3 avec 4 aimants en plus pour améliorer le maintien en position ouverte
  • 22 avril 2022: Ajouté supports lentille macro interchangeables. Très facile de les échanger en fonction de la résolution souhaitée Plus besoin d'utiliser de la colle pour maintenir la lentille en place, avec la nouvelle version, celle-ci est prise en sandwich entre les 2 parties jointes avec du double faces

Vous aurez besoin:

Couvercle LCD et clavier: https://www.thingiverse.com/thing:5341742

Category: Hand Tools

Tagi