1 / 1
Feet for Datto ALTO 2, ALTO 3, S3X1, and S3X2 cases
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is printed out of TPU for a softer foot. I use M3 x 10MM Socket Head Cap Screws.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is printed out of TPU for a softer foot. I use M3 x 10MM Socket Head Cap Screws.