Shredex M3 Stick end remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As per the Zeno remix all I have done is add a fatter shaft to allow M3 inserts to be added.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 1065
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v2.0
https://www.printables.com/model/212538-m3-and-m4-stick-ends
Cudos to Shredex for the original.
Props to the originator for giving us a nice stick end. Sometimes I thumb and sometimes I pinch.
Fatter shaft added to allow an M3 insert.
FWIW the hole is a perfect fit for a resin print which should have a high degree of accuracy. What I have been doing is applying a bit of resin out of the vat to ther outside of the insert before curing. After curing you should have an incredibly solid fitting stick end that as as solid a fit as the original machined metal part.
I printed with 50 / 50 standard green resin and monocure flex. Should take a beating and not be brittle.