Mohar.XYZ V4 Hopper Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Polycarbonate granulate hopper mount for the Mohar.XYZ V4 Pellet Extruder. The use of polycarbonate or another high-…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Polycarbonate granulate hopper mount for the Mohar.XYZ V4 Pellet Extruder.
The use of polycarbonate or another high-temperature-resistant plastic is recommended as the part may experience high temperatures.
This mount works in combination with the quick-release granulate feed supply which can be found here: https://www.thingiverse.com/thing:5423072
Best printed with the quick release mount (big flat rectangle with the hole) facing down. That way only the mount attachment will need support and the strength of the part is in the optimal direction once mounted.
Hardware needed:
4x M3 x 5mm (6mm also works)
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: PolyMaker PolyMax PC (Polycarbonate) Black
Category: 3D Printer Parts