Doubled brackets for improved MMU spoolholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the idea of @AndreasO to stack the spoolholders of MMU units to save some space.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 621
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the idea of @AndreasO to stack the spoolholders of MMU units to save some space.
I took his brackets and designed doubled brackets to interconnect the 'spooltowers' for more stability.
There are three different designs:
- UpUp with two upper brackets
- LowLow with two lower brackets
- UpLow with a lower and upper bracket
For MMU1 you need:
- 2 x spoolholder_LowLow
- 2 x spoolholder_UpUp
- [4 x spoolholderlower]*
- [4 x spoolholderupper]*
- [2 x spoolholderback]*
- [4 x spoolholderstand]*
* From AndreasOs original design https://www.prusaprinters.org/prints/25183
For MMU2 you need :
- 2 x spoolholder_LowLow
- 2 x spoolholder_UpLow
- [6 x spoolholderlower]*
- [6 x spoolholderupper]*
- [3 x spoolholderback]*
- [6 x spoolholderstand]*
* From AndreasOs original design https://www.prusaprinters.org/prints/25183
Print instructions
Printer Brand: Prusa
Printer: i3 MK3s MMU2s
Rafts: Doesn't Matter
Supports: No
Resolution: 0,2 mm
Infill: 20%
Notes:
I recommend a brim for the Spoolholder_LowLow.stl, Spoolholder_UpUp.stl, Spoolholder_UpLow.stl
For detailed Instructions see https://www.prusaprinters.org/prints/25183