Orleans and expansions esprialized insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insert for Orleans and expansions to print espiralizing (in vase mode): little time and material consuming.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
This insert fits Orleans boardgame (4 players version), Invasion expansion and Trade & Intrigue expansion with coin capsules for the tokens, everything inside the base game box (boards included).
I was looking for a way to have it all organized, at least compartmentalized. You will need some zip boxes yet.
I don't sleeve my cards, so I cannot say if they fit. Print “cartas” stl first if you want to be sure.
Each STL file is mented to be printed in vase mode. For 0.4 nozzle I usually use 0.3 layer height, 0.8 extrusion width (overextruding).
This time I used a 0.6 nozzle with 0.4 layer height, 0.8 extrusion width to have a little more room for the game components, but 1mm should be safe too.