Vase mode container - Easy snap on lid - Filament saver, less is better
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
...designed for the container contest, this combines max container volume with min filament usage and short print time
- Ocena
- 4,667 / 5
- Polubienia
- 48
- Pobrania
- 318
- Wydruki
- 5
- Wyświetlenia
- 1283
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
As there was the contest for new container designs I decided not to do the #1000 modular organizer container with fancy lid design, which can be bought for a fraction of the filament costs in a discount store, but to utilize the vase mode feature to create a filament saving container while offering a maximum storage volume. This 1 liter container can be printed at less than 40g filament when using a 0.4mm nozzle and at around 55g when using a 0.6mm nozzle (suggested nozzel for better stability).
Print Setting:
- Just print the container and the lid in vase mode with 2 bottom layers. Also take care if you have a setting like the “Wall Line Width” and “Outer Wall Insert” in Cura which are changing the the width of the single outer wall when printing in vase mode.
- You might want to change the lid scale up by 1% or 2% depending on your nozzle diameter and slicing setting to allow for a tight fit without breaking the wall.
My settings for slicing with CURA:
0.4mm nozzle:
- lid scale 100% => tight fit
- lid scale 101% => loose fit (but still not falling off, when upside down)
0.6mm nozzle:
- lid scale 101% => tight fit
- lid scale 102% => loose fit (but still not falling off, when upside down)
I recommend the 0.6mm nozzle since the extra 0.2mm wall strength allows also to store heavier items without the risk of breaking the wall.
CAD:
I also included the FreeCAD model if you want to tweak the design for yourself.