Simple wall mount bracket for Fritz!Box routers ( fits other makes )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adjustable single-screw wall mount for attaching a router to a wall.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
Easy print wall mount bracket for attaching a router to a wall.Uses a single screw into the wall so no chance of it not being level :)
Version 2 has studs on the mounting blocks so no screws required to attach to the Fritz, only one for the wall! The blocks are printed seperately from the main rail as it's easier this way.
Version 1 mount blocks take either a small wood screw or small M3 pan head ( may need to drill hole slightly to accommodate these ). Each slide block is adjustable to fit a wide range of different sized mounting holes.
Version 1 Printed on Ender 3 , standard settings with supports. Use .2mm bottom layer to prevent seizing of the slider blocks.
Version 2 Printed on Prusa mk3 , print blocks laying on their side to improve strength.