SSUPD Meshlicious GPU Cable Snap Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-on panel cover to organize up to 3 GPU cables coming out the rear of your Meshlicious
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 1465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
The Meshshshlishshshious has a small square cut out on the rear for your GPU cables. While some people have used this space to create panels for screw-on DisplayPort or HDMI adapters, I bought 90-degree adapter cables that were too long for this. Instead of having an octopus of cables coming out the rear of my case, I designed this simple snap-on bracket to organize them.
I was able to print this bracket without supports, and it snaps into the hole with no additional hardware needed. Print the cable_organizer if you want to organize up to 3 cables coming out of this hole. Alternatively, if you also have Rygus43's Meshlicous 45mm Riser Foot (which you should, it's excellent) and have your cables coming out the bottom of the Meshlicious, you can just print the hole_cover to have a snap-on cover for that square.
These are the 90-degree adapters I bought: ALYYDBG 8k/60Hz 90 Degree Angle Displayport 1.4 Extension Cable