1 / 1
SANYO CRT TV FXTG Remote Control Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remote holder for "old school" SANYO TV remotes circa mid-2000s. This will not work for all SANYO remotes. This…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remote holder for "old school" SANYO TV remotes circa mid-2000s. This will not work for all SANYO remotes. This could work with other remotes, both SANYO and non-SANYO, as long as they fit within these dimensions:
- Between 30.5 and 46.5 mm wide.
- Less than 18 mm thick including button thickness. (Can exclude button thickness if the entire button layout is horizontally centered and the width is under 30.5 mm.)
- Over 77.5 mm tall.
For reference, my remote model is "FXTG" and my TV model is "DS20424". Attached to the side of my TV with double-sided foam tape.
Printed with two walls and 20% infill.
Category: Electronics