Thermal Label Printer Stand - Support Free
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A space-saving, support free stand for thermal label printers
- Ocena
- 4,833 / 5
- Polubienia
- 145
- Pobrania
- 1094
- Wydruki
- 22
- Wyświetlenia
- 5332
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit 06 May 23:
If you're encountering interference with the labels and cables, @darkspeedy26 created an awesome label guide:
https://www.printables.com/model/472863-label-guide-for-thermal-label-printer-stand-suppor
Edit 22 Aug 22: Updated roller and roller pin dimensions for better fit/performance
After trying some of the other label printer stands on here, I either wasn't satisfied with the design or how they printed. It was time for me to take… a stand. Make a stand. I meant make a stand.
Key criteria for this design:
- No sharp corners, particularly on the outer perimeter
- Share a similar design with my label printer (Neflaca BT printer: https://a.co/d/c5VUsjs)
- Print quickly and easily without supports
- Magnets, because who gives a flux?
BOM
- 1x Stand (printed)
- 1x Roller (printed)
- 2x Roller Pins (printed)
- 2x 608ZZ Bearings
- (optional) 4x 6x3 Neodymium magnets
Filament Material
- Any, but PLA is probably still the easiest. Get fancy if you want, doesn't bother me! :)
Printing/Assembly
- Print stand design of your choice, roller, and roller pins in your choice of filament
- (optional) Stack magnets together in pairs, then press into the small cavity where the label roll will rest
- Insert roller pins into roller
- Attach bearings to either side of roller
- Insert roller through label roll
- Insert into stand