1 / 2
Modular Desktop Fountain double fountain + extended splashguard
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The tower fountain attaches to the plateau fountain for extra height, 2.1mm rail on the splashguard for walls
- Ocena
- 4,4 / 5
- Polubienia
- 42
- Pobrania
- 399
- Wydruki
- 6
- Wyświetlenia
- 2600
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 11)Remiksy (0)Kolekcje (110)Powiązane
Cut out the base of the tower fountain so it attaches to the plateau fountain by friction, extending the maximum height (make sure your pump can handle it)
The Splashguard got extended by 2.1mm so it can fit a 2mm laser cut acrylic sheet, because of the many corners you'll need to cut a wall for each side the object have but this way you can enclose the whole area for example humidity control.
