Zero Motorcycles FX FXS FXE Swingarm Compartment Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,88 € – 3,52 € netto (bez VAT)
Dla pliku: A_zmc_swingarm-cap_0.2mm_ASA_MK3S_2h36m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,20 € netto (środek widełek).
- Masa podana przez autora
- 25 g
- Czas druku podany przez autora
- 2,59 godz.
- Materiał u źródła
- ASA
- Materiał wyceny
- ASA
- Drukarka wyceny
- Bambu Lab X1 Carbon - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Closes the tube in the swingarm from both sides to create dry & clean storage in your motorcycle
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 1730
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Changelog
| 2022-08-23 | v1.01 | increased infill and perimeters for all caps |
| 2022-08-21 | v1.0 | initial public release |
Please note:
I have intended my models to be free of cost for the community, fun to print and a joy to use.
Sadly, some acquaintances decided to offer them printed for sale or re-uploaded elsewhere against the licence.
That's why I limited my offer to the gcode, as I don't have the time or motivation to follow up violations against the licence.
I'm sad that I have no better options.
Unused space in Zero Motorcycles XMX swingarm?
Create sealed storage space for warning vests, emergency candy, charging cable, tools, …
Optional feature: graphics to show basic maintenance information:
- Tyre inflation front and rear
- for both, road- and
- off-road tyres.
- Belt tension limits for both, Krikit load or Gates app frequency measurement.
I have mounted the tyre inflation values to the right side, as this is where I approach when the motorcycle rests on its kick stand. Belt tension limits for the left side, as its measured there.
The maintenance values are from the 2022 FX/FXS/FXE manual. Please check if they are valid for your model.
Choice & file prefixes
 |  |  |  |
| A | B | C | D |
| cap type | FX | FXS | FXE |
| plain | A | A | A |
| belt tension | B | B | B |
| tyre inflation | C | D | D |
| all cap variants use the same gasket | |||
| gasket | G | G | G |
Fit
I have printed two dozens of variants during development of the caps. I had them too lose, and I also had variants that I needed to destroy to get them off again. The ones published here are ideal on my bike!
Dimensions are vital to the function of the gasket; sealing, and most important: holding force.
There may be some tolerances in the production of the swingarms. I have designed them to fit vertical height= 75mm/2.95" and horizontal width= 75.6mm/2.98"
It is unknown to me how stable these dimensions are through ZMC's pipe forming and welding processes. You may measure your bike's openings before, and scale the prints accordingly.
I recommend to print one side first, and see if the holding force is right for you; adjust the next print if necessary.
Production
plain & graphics type
Each cover consists of the plug and the gasket. I have printed the plug in ASA, and the gasket in TPU. Should print fine with a 0.40mm nozzle. Cap's 3mf-files have settings for ASA, and also shrinkage compensation (100.65%) for the filament I used. Remember to adjust to your filament choice.
graphics type
The graphics look better printed with a 0.25mm nozzle. The files contain the settings for manual colour change: all you have to do is change the filament between housing and graphics colour when the printer asks you to.
gasket
The gasket needs to be printed with FLEX material. I used TPU to have it elastic enough to mount it on the cap and to squeeze it into the compartment.
Assembly
The gasket is directional - it needs to be assembled with the smaller sealing lip in direction of the bottom.
It's a tight fit, and not supposed to come off the cover after assembly.
Development
Please feed back in the comments, and share your makes!