1 / 9
PrintNC Z independent air hose mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part uses 2x 8mm smooth rods; of at least 250mm, 4x LM8UU bearings, and at least 3 rod spacers with set screws,…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This part uses 2x 8mm smooth rods; of at least 250mm, 4x LM8UU bearings, and at least 3 rod spacers with set screws, to stop the travel of the rods at desired heights.
The air hose and nozzle had 1/2" threading. End users might have to measure their available air hoses.
Category: Robotics