1 / 6
MM3 Fan Duct for dual extruder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found maddavo's fan duct to not function with the way I had my hot ends mounted. I made the following changes to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I found maddavo's fan duct to not function with the way I had my hot ends mounted. I made the following changes to adjust this part for my use:
- Widened the gap for the hot ends, to allow for hot ends with silicone covers.
- Made the portion of the blower between the hot end and carriage much thinner, so as to fit comfortably.
- Adjusted the mounting holes so that the fan could be mounted either closer, or further from the build platform.
- Reduced the lip of the fan mount, so that the fans I had on hand don't get caught on it.
- Added screw mounts for the fans to make them more secure.
- Angled the vents that surround the hot end downwards, in the hope that it improves airflow.
Added an updated version. Apologies for the horrible meshes.
Category: 3D Printer Parts