Print-in-place Lenovo Yoga fold-out riser V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EDIT: VERSION 2, much faster and easier to print, with a "live" hinge instead of a pin hinge. It also sits higher,…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 924
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
EDIT: VERSION 2, much faster and easier to print, with a "live" hinge instead of a pin hinge. It also sits higher, folds lower and is wider. Printed in PLA.
I might edit it to make it a bit stiffer since it bends after some use, though it does not affect the functionality.
EDIT V2.1: as predicted, the part was too thin and deformed over the course of one month. The model and photos have been updated with the thickened model.
Original text:
A disadvantage of the Yoga laptops is that they sit very low on the surface, sometimes impeding the cooling.
I wanted a riser that:
- can be folded and still allows the laptop to be converted to a tablet
- is stable and does not easily fold back flat
- has a wide base, not just two points of contact
- does not block any ports or require any long-term modifications.
The "hinge" is fixed with double-side tape on a Lenovo Yoga C940.
I reduced the angle on mine with a bit of hot-glue inside the hinge contact point, so that the laptop sits slightly higher. The pictures show the original angle.
Designed in OnShape: https://cad.onshape.com/documents/457e23c1f7a65db08ec214c6/w/f956602bab5955f9316b5ba4/e/a28eab812808b42625ffb95f
Printed in PETG,no support needed.
Print Settings
Rafts:
No
Supports:
No
Infill:
30%
Filament:
noname PLA or PETG
Category: Tablet
