Ultrasonic Cleaner Drainage Accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A series of drainage accessories designed for the CO-Z 6L & similar ultrasonic cleaners.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 718
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a series of drainage accessories designed for the CO-Z 6L ultrasonic cleaner, but I'm sure it would fit any other of the cheap ultrasonic cleaners that look like the one sold by CO-Z.
They're all designed to print on the plate of a SLA printer.
They didn't leak in my tests, but I still put some PTFE tape on the threads to seal them.
I've attached Fusion 360 files for your customizing enjoyment.
Thread profile: 16mm x 1.25 pitch
Spout
It provides a sharp low edge so that liquid doesn't dribble out on to the table as it drains.
Print it spout-side down
Barbed Hose Connector
Connector for a 12mm inner diameter hose. Use a hose clamp.
Print it threaded side down.
90 Degree Barbed Hose Connector
Same as above, but with a 90 degree angle.
Print threaded side down and add a couple supports for the right angle part
This is a cross-post from Thingiverse, where there may be more discussion on the model.