Tabletop Token Boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This box is designed to store tabletop tokens of 2mm thickness, but the included scad is parametric for different sizes
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I built this to hold indexed sets of tabletop tokens, such as those in my Paper Miniature Bases. Three sizes are included: 12x1 Medium, 12x1 Large, and 8x2 Tiny. The OpenSCAD file is included and it should be relatively easy to modify this to hold any flat token, or potentially even coin cell batteries. I would be cautious with batteries and ensure that the tolerances are very small between them to prevent accidental shorts.
The hinges are printed in place and usually require a bit of wiggling to get them loose. I wouldn't try to force them, if you're having trouble try increasing the hinge buffer in the SCAD file (and please leave me some feedback). The boxes will not latch without some tokens inside to align the lid. You'd need to decrease the hinge buffer for that to work, but I found that tended to fuse the hinge too frequently.