P802Q 12864 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thanks to KayIOA for this. His works on the Tronxy. I modded it to fit the stainless steel Zonestar to mount where the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Thanks to KayIOA for this. His works on the Tronxy. I modded it to fit the stainless steel Zonestar to mount where the 2004 5 button LCD was mounted. The other parts such as the cover and a button can be found on his link, the Remix Source Files.
Print Settings
Printer:
Zonestar P802QA
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
30%
How I Designed This
Sketchup Original from KayIOA
Original was 208mm, and the opening for the P802Q was 160mm, just cut the ends off and placed the correct location for mounting screws.
Category: 3D Printing