Utility Blade Holder with Snap Sheath
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sturdy handle and sheath for holding utility knife blades. Great for cutting boxes or for gifting to friends.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 906
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
You can buy one of these from me here!
Consider supporting us on Patreon!
No supports needed for this print. Look at the pictures for my print orientations.
I print out of PETG at 220C with 0.2mm layer height.
Takes 61mm replacement utility knife blades.
Model requires (3) #3-24 thread-forming screws (https://www.mcmaster.com/90380A265/)
2 screws hold the blade in place. The third screw keeps you from losing the clamp. Only 2 screws are required to be removed in order to replace/rotate the blade.
Multiple handle designs are included. Print them all!