Drawer knives organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used this model since a year in my kitchen :)
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Hi!
I used this model since a year in my kitchen :) Everything is still strong as new and perfectly integrated in my drawer.
I needed a knives organizer as some of the blades are pretty sharp. My drawer had few compartments to store our cutlery, so I reallocated one for this.
The model is printed in few parts then glued together. It was printed in wood PLA (from Extrudr) with 0.6 mm nozzle to match with the drawer separator.
It was designed for our 405mm x 125mm drawer. I joined the STEP file for you to adapt-it.
Be careful with the 3mf as I use a .6mm nozzle by default, do not forget to switch to your nozzle size